TIMESAVER LAPPING COMPOUNDS

yellow can

PRECISION FINISH ON BEARING SURFACES

GUARANTEED NOT TO IMBED - WILL NOT CONTINUE TO CUT!

Timesaver Lapping Compound does not contain emery, aluminum oxide, silicon-carbide or similar charging abrasives.
They are unconditionally guaranteed not to imbed into any metal surface.
Prepared in powder form, to be mixed with oil as used.
Timesaver first acts as an abrasive, then the particles diminish to a polish, and finally to inert material.
Directions for use in each can.

yellow can YELLOW LABEL GRADES
FOR SOFT METALS
(Babbitt, Brass, Bronze and Aluminum)
#40 Coarse #60 Medium
#80 Fine #100 Very Fine RECOMMENDED FOR
Fitting babbitt bearings, brass valves, bronze bushings, bronze worm gears;
Fitting brass, babbitt and other soft metal quides
Cooling down hot journal bearings without disassembly
Similar uses.

green can GREEN LABEL GRADES
FOR HARD METALS
(Steel, Cast Iron, Hard Bronze and Stainless Steel)
#55 Coarse #77 Medium
#111 Fine #333 Very Fine RECOMMENDED FOR
Removing tool and cutter marks, and high spots from new steel and hard bronze gears
Lapping-in rebored cylinder walls, noisy gear units, or new re- placement gears
Extreme precision fitting of small steel parts
Similar uses.

Available in:

Test Kit ( 8 assorted 3oz. Cans)
1 lb. cans
5 lb. cans
25 lb. pail
50 lb. pail

Back to Top of Page

gnt byitfrom.com

	YELLOW LABEL GRADES FOR SOFT METALS (Babbitt, Brass, Bronze and Aluminum) #40 Coarse #60 Medium #80 Fine #100 Very Fine	RECOMMENDED FOR Fitting babbitt bearings, brass valves, bronze bushings, bronze worm gears; Fitting brass, babbitt and other soft metal quides Cooling down hot journal bearings without disassembly Similar uses.
	GREEN LABEL GRADES FOR HARD METALS (Steel, Cast Iron, Hard Bronze and Stainless Steel) #55 Coarse #77 Medium #111 Fine #333 Very Fine	RECOMMENDED FOR Removing tool and cutter marks, and high spots from new steel and hard bronze gears Lapping-in rebored cylinder walls, noisy gear units, or new re- placement gears Extreme precision fitting of small steel parts Similar uses.