Reco Induction Bearing Heaters

Dimensions

Model SC   Model BC     Model BCS   Raising Blocks

The Reco Induction Bearing Heater is the superior method of expanding bearings, gears, sprockets, couplings and sleeves. For placement on shafts, it is the safest, quickest, most economical method of applying heat.

Induction heating is safe - no fire hazard from open flames or contamination from hot oil baths or forcing cold bearings on with a hammer

Evenly heats the bearing's inner race for longer life from proper installation

Quick, positive bearing installation - correct alignment is assured to reduce costly shutdown

Portable - just plug it in, requires less man hours

Steel case for durability and long life

Can be used to demagnetize bearings

Available in 3 models to handle most applications

Reco bearing heaters come complete with three standard cross bars for a wider range of bearings

Bearing Heater Dimensions

catalog number	A	B	C	D	E	F
SC	4-3/4"	3-5/8"	3/4"	3/4"	9-1/4"	9"
BC	8"	7"	1-1/4"	1-1/4"	14-3/4"	16"
BC Special	12-1/4"	7"	1-1/4"	1-1/4"	18-3/4"	16"

Back to Top of Page

SC Model

• Choice of Either 110 V or 220V models
• Handles Bearing from the smallest bearing up to 11" O.D x 4-3/8" wide.
• One unit covers a wide range of bearings, gears, sprockets, coupling and sleeves
• Optional raising block available to increase bearing O.D. capacity to 14"
  
  
  

  *1/2" bar is not available in Canada

  Catalog Number	Voltage	standard cross bars	optional cross bars	Approx weight
  RECO.SC110	110V ( 17 amp)	3/4" 1-1/4", 2"	1/2" *	52 lbs
  RECO.SC220	220V ( 9 amp)	3/4" 1-1/4", 2"	1/2" *	52 lbs

Back to Top of Page

BC Model

• Choice of either 220V, 440V or 550V Models
• Handling bearing from the smallest bearing up to 22" OD x 8" wide
• One unit covers a wide range of bearings, gears, sprockets, coupling and sleeves
• Optional raising block available to increase bearing O.D. capacity to 32"
  

  Catalog Number	Voltage	standard cross bars	optional cross bars	Approx weight
  RECO.BC220	220V ( 30 amp)	1-1/4, 2", 3"	3/4", 1"	200 lbs.
  RECO.BC440	440V ( 20amp)	1-1/4, 2", 3"	3/4", 1"	200 lbs
  RECO.BC550	550V ( 20 amp)	1-1/4, 2", 3"	3/4", 1"	200 lbs

  Back to Top of Page
  

BC Special Model

• Choice of either 220V, 440V or 550V Models
• Handling bearing from the smallest bearing up to 22" OD x 12.25" wide
• One unit covers a wide range of bearings, gears, sprockets, coupling and sleeves

Optional raising block available to increase bearing O.D. capacity to 32"

* 1" bar is not available in Canada

Catalog Number	Voltage	standard cross bars	optional cross bars	Approx weight
RECO.BCS220	220V ( 30 amp)	1-1/4, 2", 3"	1" *	235 lbs.
RECO.BCS440	440V ( 20amp)	1-1/4, 2", 3"	1" *	235 lbs.
RECO.BCS550	550V ( 20 amp)	1-1/4, 2", 3"	1" *	235 lbs.

CAUTION:
Bearing Heater should not be set within 24" of metal structures

To Demagnetize:
Simply remove bar, turn heater on and pass bearing several times between the two upright columns without contacting columns.

Warning
DO NOT operate an induction bearing heat if you have a heart pace-maker. The strong magnetic field emitted my the heater may affect operation of such devices.

Back to Top of Page

Raising Blocks

• provides additional height utilizing existing unit to handle larger bearing outside diameters
• SC raising blocks increase SC bearing heater capacity up to 15" OD.
• BC raising blocks increase BC and BC Special bearing heater capacity up to 32" OD
  
  

  Catalog Number	Height	Width	Approx Weight
  RECO.SCRB (fits SC bearing Heaters)	2-3/8"	2-5/8"	7.5 lbs.
  RECO.BCRB (fits BC and BC Special Bearing Heaters	5"	3-5/8"	31.0 lbs.