HJJ ® screw-holding drivers

• For hard to reach screws. The HJJ screw-holder grips the screw head with twin bits in one quick and easy step.
  
  
• To grip screw, place bit in screw recess and push. Then simply maneuver the screw into position. The HJJ screw-holder won't release the screw until the threads take hold and it is pulled free.
  
  
• After use, tap release rod at end of screw-holder to reset for next screw.
  
  
• The HJJ screw-holder is just as efficient for REMOVING screws from difficult spots. Press screw-holder lightly into screw recess, and turn making screw push screw-holder out.

For Slotted Screws - Round Brass Handles

	Part Number	Length	Blade Width	Blade Thickness	Handle Diameter	Recommended for Screw sizes
	HJJ.3-10	10"	3/16"	1/32"	1/4"	Nos. 6,8,10,12, and 1/4" Screws
	HJJ.3-8	8"
	HJJ.3-6	6"
	HJJ.3-3	3"
	HJJ.4-8	8"	9/64"	.022"	3/16"	Nos. 3,4 and 5 screws
	HJJ.4-6	6"
	HJJ.4-3	3"
	HJJ.5-8	8"	.102"	.018"	3/16"	Nos. 0,1,and 2 screws
	HJJ.5-6	6"
	HJJ.5-3	3"

For Slotted Screws - Hex Vinyl Handles

	Part Number	Length	Blade Width	Blade Thickness	Handle Size	Recommended for Screw sizes
	HJJ.3E-10	10"	3/16"	1/32"	5/16" hex	Nos. 6,8,10,12, and 1/4" Screws
	HJJ.3E-8	8"
	HJJ.3E-6	6"
	HJJ.3E-3	3"
	HJJ.4E-8	8"	9/64"	.022"	1/4" hex	Nos. 3,4 and 5 screws
	HJJ.4E-6	6"
	HJJ.4E-3	3"
	HJJ.5E-8	8"	.102"	.018"	1/4" hex	Nos. 0,1,and 2 screws
	HJJ.5E-6	6"
	HJJ.5E-3	3"

For Types II and IA Cross-Shaped Recess Screws* and small-diameter slotted screws
Round Brass Handles

	Part Number	Length	Blade Width	Blade Thickness	Handle Diameter	Recommended for Screw sizes
	HJJ.3X-10	10"	1/16"	1/32"	1/4"	Nos. 6,8,10,12, and 1/4" Screws
	HJJ.3X-8	8"
	HJJ.3X-6	6"
	HJJ.3X-3	3"
	HJJ.4X-8	8"	3/64"	.022"	3/16"	Nos. 3,4 and 5 screws
	HJJ.4X-6	6"
	HJJ.4X-3	3"
	HJJ.5X-8	8"	1/32"	.018"	3/16"	Nos. 0,1,and 2 screws
	HJJ.5X-6	6"
	HJJ.5X-3	3"

*Recommended for Reed & Prince FREARSON (Type II) and for Phillips POZIDRIVE® (type 1A). Not recommended for Type I cross-shaped recess screws ( the ordinary Phillips screws).

For Types II and IA Cross-Shaped Recess Screws* and small-diameter slotted screws
Hex Vinyl Handles

	Part Number	Length	Blade Width	Blade Thickness	Handle Size	Recommended for Screw sizes
	HJJ.3EX-10	10"	1/16"	1/32"	5/16 Hex"	Nos. 6,8,10,12, and 1/4" Screws
	HJJ.3EX-8	8"
	HJJ.3EX-6	6"
	HJJ.3EX-3	3"
	HJJ.4EX-8	8"	3/64"	.022"	1/4" Hex	Nos. 3,4 and 5 screws
	HJJ.4EX-6	6"
	HJJ.4EX-3	3"
	HJJ.5EX-8	8"	1/32"	.018"	1/4" Hex	Nos. 0,1,and 2 screws
	HJJ.5EX-6	6"
	HJJ.5EX-3	3"

*Recommended for Reed & Prince FREARSON (Type II) and for Phillips POZIDRIVE® (type 1A). Not recommended for Type I cross-shaped recess screws ( the ordinary Phillips screws).

Back to Top of Page

gnt byitfrom.com